Vera Control, Ltd.

Welcome, Guest Login

User Guides

How to install and setup VistaCam 900

Last Updated: Jul 26, 2018 07:18AM PDT

Install and Setup Vistacam 900

 

This guide will teach you how to:

  • Mount and install your Vistacam 900 camera
  • Setup your Vistacam 900 wirelessly

Wireless setup
 

Camera side

 
  1. Press and hold the WPS/RESET button on the back of your VistaCam 900 for 3 seconds

     

  1. The Network LED will begin blinking amber indicating the pairing process has started

Vera side


Follow the directions for the Vera Controller that you have:
 

VeraEdge (Figure A)
 

  1. Press the WPS button for at least 5 seconds, on your Vera
  2. After 1 minute, the green Power LED on the back of the camera will be solid and the Network LED will begin blinking green


VeraPlus & VeraSecure (Figure B)

 
  1. Press on the Select button
  2. Your Vera will enter into selection mode. Keep pressing the Select button until the Wi-Fi LED blinks
  3. Press the Sync button to confirm the selection and activate WPS mode. The unit stays in WPS mode for 2 minutes
  4. In 1 minute the green Power LED on the back of the camera will be solid and the Network LED will begin blinking green

NOTE: Please ensure that the Vistacam 900 Camera is configured and added to the network before mounting it.


Mounting and installation

  1. Identify the location for mounting your Vistacam 900 camera
  2. Place the camera in the desired position on the wall/ceiling. Then screw the two screws into the wall through the holes on the camera's stand
  3. Firmly connect the AC Power Adapter to your VistaCam 900 Power Connection and then plug it into an AC outlet


What can you do next?

 
  • Connect Amazon Alexa with Vera
  • Contact and enable Customer Care
support@micasaverde.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete