Reset Atom Hub
The reset procedure is designed to recover the Atom functionality after undesired user actions or internal failures. There are 3 reset commands which can be executed: “Soft reset” and “Reset to factory defaults”, and "Reset WiFi settings".
The soft reset clears all connected devices, removes user plugins but leaves the Atom hub connected to the network and the to user account in the cloud. It can be started remotely from UI and after reset hub will remain accessible to user.
Reset to factory defaults procedure is for situations when soft reset is not enough to recover from all errors or user is not going to use the hub anymore. After this type for the reset, the hub will be brought to a default state with no network and cloud connections and further connections to all devices will be lost.
Reset WiFi settings will clear corresponding settings on the Hub. Then, after restart, Hub will set up default access point that will make it accessible for local connections.
Plug your Atom into a USB power adapter or appliance that is always connected to power.
1. Reset Wi-fi and network settings to factory defaults.
With the Atom still plugged into the USB port for power, press the reset button twice (0.2 - 2,5 seconds) - The status LED will blink twice as confirmation.
2. Soft Reset - Removes all the devices, resets the user settings. (Atom hub remains connected to your Wi-Fi network) - The status LED will blink fast as confirmation.
With the Atom still plugged into the USB port for power, press long on the reset button (5 - 9,5 seconds)
3. Factory Reset - Resets all the Atom hub setting to factory defaults.
With the Atom still plugged into the USB port for power, press long on the reset button (more than 10 seconds) - The Status LED will turn solid ON as confirmation.