Reset Button

Reset button action	Result action	LED Indication
1 short (0.05 - 0,5 seconds) press within 1 .5 second	Send the broadcast message to cloud server	None
2 short (0.05 - 0,5 seconds) presses within 1.5 second	Reset client connection Wi-Fi settings	Two Blinks
3 short (0.05 - 0,5 seconds) presses within 1.5 second	Perform hub Power off action	Fast yellow blinking
One long (2 - 5 seconds) press	Reboot controller
One long (5 - 10 seconds) press	Soft reset
One long (10 - 20 seconds) press	Factory reset
Holding more than 20 seconds	Cancel factory reset start

Reset logic

Actions to be performed on both reset type are summarized in the table below

Hub element	Soft reset	Reset to factory defaults
Included devices	Remove from hub, left in included state	Remove from hub, left in included state
ZWave network ID	Change to random value	Change to random value
WiFi settings	Doesn’t change	Restore to defaults
Backups stored at controller	Doesn’t change	Remove
Plugins data	Remove	Remove
Other user data	Remove	Remove
User addons and plugins	Don't change	Remove
Default addons and plugins	Don't change	Restore to defaults

	Led Status	Solution
The hub is powering on		Wait for it to boot
The hub has encountered an error while powering on		Soft reset the hub
The hub is upgrading the firmware		Wait for the hub to finish and LED Status to turn steady blue
The hub is in pairing mode		See specific device pairing instructions
The hub has detected the paired device		Check your app or dashboard to see and control your device
The hub cannot connect to Internet		Check wireless or wired connectivity