Articles in this section

See more

UI7 - Vera Firmware Update - Version 7.0.31 (1.7.4969/1.7.4970/1.7.4971) - March 2nd, 2020

Sorin Maxim
  • Updated
Follow

UI7 - Vera Firmware Update -  Version 7.0.31 (1.7.4969/1.7.4970/1.7.4971) - March 2nd, 2020

Firmware

New Features:

  • Added support for the new VistaCam 702 on firmware and Web UI.
    *please note the final support/integration for the camera will come together with the next release of the Vera mobile apps.
  • Added new variable 'WakeupCapabilities', device information for Wake-up Interval Capabilities Report (CC Wake Up V2). [wiki] 

Fixes:

  • Fixed the issue reported in the 7.31 initial Live release with wattage and kWh values not being displayed in the Web UI and iOS app
  •  Fixed the ' Xmas lighting' issues reported in Vera Plus and Vera Secure.
  •  Fixed the issues with the upgrade process reported on Vera Plus caused by bad blocks.
  •  Fixes the upgrade issues reproducing on slow networks where some files need to be downloaded during the upgrade process, which on slow networks it takes more than 15 minutes. In order for us to investigate and analyze any further issues with the upgrade process that might be caused by 'slow networks' please use this tool https://dl.mios.com/spdtst/ to get data about download/upload speed and share the results in case of issues with the Ezlo team.
  •  Fixed the issue with auto-update option being unchecked after plugin update

Based on the current implementation if the connection is lost during the upgrade process will be resumed once the internet connection is reestablished.
Please note that if the controller is in a state where the power led is blinking it means that the download process is still in progress and it should not be disconnected from the network or power cycled.

 

Known issues:
  • Issue with being unable to manually change day/night extra setting on Vistacam 700 from the Web UI
  • Issue with an error message being displayed when trying to update Weather Settings without changing Temperature Format.
  • Issue reported on units that are bridged, with devices on the slave units that generate alerts on the master unit , every time the engine reloads. The issues was reported for door locks.

  • Issue reported with not being able to control Hue devices with the Philips Hue 2 plugin. 

  • Issues on icons/templates for UV Sensors and Generic Sensors   with no space between “Level” and the value for “Level” not being correctly aligned.

  • Issue with associations handled from web UI that are still handled securely  even when the device has been included insecurely.

  • Issue with previous notifications added being still present in user_data after Reset Z-Wave Network was done.

  • Issue with the plugin startup messages not being displayed correctly on dashboard cards

  • Issue with Job watch callback not receiving  job number

  • Issue on cameras where  error message about snapshots, recording, live view are displayed multiple times

  • Issue with Disable "Broadcast SSID" not working from Settings"->"Net & Wi-fi" ->select "Manually configure (advanced)";

  • Issue with lights turning off while live streaming page is open on Firefox, when the option to turn on the light when user view the camera is be enabled.

  • Issue  on Qubino DIN Pilot Wire where preset modes Frost /Confort / Confort-1 / Confort-2 aren't properly set on device.

  • Issue on Vision  Glass Break & Shock Detector VSN-ZS5101US where In step two no content is displayed in Device Wizard.

  • Issue with the burglary alert being received without template.

  • Issue on GoControl GC-TBZ48 thermostat with not being able to change setpoints in scenes.

  • Issue on Aeon LED Bulb (ZW098)  when changing color back to white the color is changing to 'blueish' white.

  • Issue on Yale Door Locks with incorrect message  being displayed when trying to add restrictions to pin codes that are not displayed in clear ("****") 

  • Issue with the smart switches with category 3 and subcategory 3 ( in Wall Switches)  are displayed with wrong icon in cpanel/setting section.

  • Issue on the Web UI with not handling times which don't contain seconds when editing an existing scene.

  • Issue with not being able  to add Foscam C2 third party camera using the add device wizard

  • Issue with Aeon Smart Switch generating ghost child devices after pairing.

  • Issue with not being able to remove multi-channel association on Gerber GPS-2000 devices.

  • Issue with being unable to set weekly restrictions on Schlage BE469ZP and BE468ZP locks

  • Issue with child devices are missing for Philio PST03-1A 4 in 1 Multi-Sensor after pairing.

  • Issue on Qubino ZMNHJD1 (Pilot Wire) with no mode is selected when a scene is run with action set as Confort-1/ Confort-2 if mode number set to be suported by Qubino ZMNHJD1 (Pilot Wire) device is 4

  • Issue with Qubino Flush On/Off Thermostat 2 not being configured during the secure inclusion process

  • Issue with controller removing log files even though the process to upload them to servers has failed.

  • Issue with the local access that is still working even if "Secure Vera" is enabled but the user enables both  "EnableUPnP" and "UPnPScanning" options. 

  • Issue with device category name inconsistency for RGB Bulbs between Web UI and mobile platforms. 

Related articles

Comments

0 comments

Please sign in to leave a comment.

Powered by Zendesk