New Features:
Services
- Reactivation of the VeraProtect Professional Security monitoring service with subscription through the Stripe payment platform.
Notes:
- VeraProtect's availability is limited to the United States, where the service is available in most of the states, with the exception of UT (Utah), TN (Tennessee), AL (Alabama), VA (Virginia), MD (Maryland), CA (California), TX (Texas), and FL (Florida).
- All new customers will enjoy a free 30-day trial.
- If you're a customer already enrolled for the Annual VeraProtect, you will see the details of your active legacy plan in the MyAccount section. Your plan will be active until the expiration date, unless you should choose early termination of the plan. Automatic reactivation is not possible. To continue to enjoy the monitoring service, after the legacy plan is terminated you must reenroll for the VeraProtect service, according to the new subscription flow. Upon reenrollment, you will have the benefit of a free 30-day trial as well, just like new customers.
- For the purposes of testing VeraProtect, your controller needs to be running the corresponding firmware, as specified below. Please note that these are intended for Beta testing only.
VeraEdge - 1.7.4832
VeraPlus - 1.7.4833
VeraSecure - 1.7.4834
Portal
- Implementation of Google Home Authentication
Android
- Reactivation of the VeraProtect Professional Security monitoring service with subscription through the Stripe payment platform.
- Search option in Devices list
- Search option in Add Device wizard
iOS
- Reactivation of the VeraProtect Professional Security monitoring service with subscription through the Stripe payment platform.
Fixes:
Android
- Corrected RGB color picker issue
Improvements:
Android
- Improved status messages related to include/exclude error events.
- Energy consumption for binary lights is now displayed on Ezlo Atom
- Removed permission request to call from the Android App
- Ability to choose multiword controller names
- Implementation of high quality camera streaming
Firmware
- Addressed the firmware storage issues tied to the Firmware upgrade process for Vera Plus and Vera Secure by:
- tweaking the space occupied by /overlay and the OpenWRT image size
- reducing the number of symlinks from /www
- having Bluetooth disabled from the operating system (OpenWRT) by default. Users can get Bluetooth working on their units by manually installing the appropriate packages.
- discarding rdate(Time protocol)(The Time Protocol is generally considered obsolete and has been replaced by the Network Time Protocol (NTP))
- Improving IO management related to UserData (improved the lifetime of the flash memory by reducing the amount of IO to ensure increased reliability of the data in the event of crashes)
- adding kernel support for the NFS and CIFS network file systems.
- Improved the communication with Z-Wave Gen3 devices (Switch/Dimmer).
- Improved Z-Wave communication with RGBW devices.
- Reduced the Luup Engine startup time.
- Made some performance improvements in the context of setting up multiple pin code restrictions on a door lock.
- Added support on Vera Plus and Vera Secure to automatically reconnect to a 5 GHz wireless access point in case of a change of channel (works only with standard 5GHz channel).
- Added Nightly Heal Maintenance parameters (enabled, what time) to UserData and set the NightlyHealMaintenance alarm according to user defined parameters. wiki 20
- Added variable in UserData to enable/disable CORS support. wiki 5
- Added support for the short version name in the LuaInterface and in the Firmware Upgrade section. wiki 1
- Added support for the model ID in the LuaInterface. wiki 3
- Added a method of removing device messages. wiki 6
- Added a method of saving the UserData to the flash memory manually. wiki 4
- Added support to enable/disable at ARR/NNU commands at wakeup (default enabled).
- Remotec ZRC-90 - added support for long-press capability.
- Fixed binary lights issue involving the “Can’t detect device” message remaining on the Web UI even after the device reports back with a new status.
- Fixed issue with the “Sorry Node Reports it’s Busy” message not being cleared unless the Luup Engine is reloaded.
- Fixed issue relating to dimming light delays occurring when switching house modes.
- Fixed issue with the Z-Wave version being displayed incorrectly in Z-Wave settings.
- Fixed Aeotec NanoMote Quad issue, which failed to configure during the secure inclusion process.
- Fixed issue related to the inability to uncheck “embedded” flag for a child device in the advanced settings tab.
- Fixed dimmer-related issue involving the “LoadLevelStatus” variable being updated before the device has actually reported back. Said device would report intermediate states when going from ON to OFF or the other way around.
- Fixed issue with “SetTarget” / “SetLoadLevelTarget” being sent when you edit a different house mode than the current one.
- Fixed issues connected to window covering devices involving delays when setting the window covering module to OFF, when changing the house mode.
- Fixed issue with the Centralite 3310 Humidity Sensor not reporting the humidity measurements.
- Fixed issue with the 2GIG-TILT1-345 device being detected as a motion sensor instead of a door/window sensor.
- Fixed issue with the ZTS100 thermostat when displaying the temperature measured in Celsius degrees.
- Fixed issue with the CT101 thermostat not showing the humidity sensor value for the battery level.
- Fixed thermostat issues where the Web UI wouldn’t update in line with mode and setpoint changes made.
- Fixed the issue with the default name of the temperature sensor for Fibaro Flood Sensor.
- Fixed issue involving the inability to add pin codes on Schlage gen5 door locks.
- Fixed issue involving the inability to remove pin codes from Danalock V3 door locks.
- Fixed issue involving the inability to fully configure new Yale locks (Yale YRD216 and Yale YRD226/246).
- Fixed issues involving hidden pin code restrictions on Yale Door Locks not being set if the engine is reloaded before the start date of the restrictions.
- Fixed issue with the wrong message being displayed when trying to set a restriction on a hidden pin code.
- Fixed issue related to Yale YRD226/YRD246 door locks where the “lock button is pressed” notification was triggered by manually locking the door lock from the inside.
- Fixed issue with Yale door locks involving PIN codes disappearing from the Web UI when multiple PINs were set at the same time.
- Fixed scene-related issues involving the “A PIN code was removed from the lock” trigger being inoperative.
- Fixed issues with incorrect alerts being triggered out when adding pin code restrictions on Yale door locks.
- Fixed door lock-related issue where the PIN name wouldn’t show up in the details of the notification received upon the removal of a pin code.
- Fixed door lock issue involving the “That PIN code cannot be used” message appearing multiple times on the device page when it should only appear once.
- Fixed issue with the wrong message being displayed when trying to mix daily & weekly restrictions.
- Fixed Kwikset door lock issue involving pin codes not working any more after the removal of a restriction.
- Fixed issue involving the inability to configure the Aeotec Doorbell/Siren 6.
- Fixed issue where the deletion of a PIN code from an offline door lock could be done but wouldn’t take effect after the said door lock was reconnected to power.
- Now the user is informed that the door lock is offline. If the user attempts to remove a given pin code from a door lock that is offline from the Web UI, they will get a “Failed to be removed from the door lock” notification and the PIN code will not be removed.
- Fixed issue related to the NodOn Wall switch CWS-3-1-00, where scenes wouldn’t be triggered when buttons were pressed.
- Fixed Yale YRD226 issue where the Pin codes would be displayed as asterisks even though the “show PIN codes in clear” option appeared checked on the Web UI.
- Fixed issue with Fibaro FGCD-001 CO sensor where a generic sensor that should be marked as ‘hidden’ was still showing up on the Web UI.
- Fixed issue involving hidden PIN codes being made visible, i.e. ‘displayed in clear,’ when setting a restriction on them.
- Fixed issue related to Nyce Motion Sensor child devices, where ‘Humidity’ and ‘Temperature’ would be included in the Lights category.
- Fixed issue with the Ecolink DW sensor gen5, where the battery level wouldn’t be displayed upon inclusion.
- Fixed issue involving the “Back” buttons in the “Extra Parameters” section having different designs.
- Fixed issue with section name not being displayed correctly in the Web UI (the name of the device wouldn’t appear as the name of the section that the user was working in)
- Fixed issue involving missing event type for the 3G up/down alerts.
- Fixed issue involving a drop-down list being randomly displayed on the left side of the screen.
- Fixed issue involving the green device status notification for the transmit command being a different color.
- Fixed issue relating to Philio PAN15-1, where the “Off” button wouldn’t change color from white to green to indicate to the user the current state of the device.
- Fixed issue involving the name label not being updated on the fly for the list tab.
- Fixed issue with the report status button not working for unassigned controllers.
- Fixed issue with the status not being updated to “On” in the “Control” tab for Philio Siren PSE02.
- Updated the forum link with Customer Care Online Resource.
Newly Integrated devices:
- Aeotec Dual Nano Switch ZW132
- Aeotec Dual Nano Switch ZW140
- Aeotec LED Bulb 6 ZWA002
- Aeotec LED Strip ZW121
- Aeotec Nano Shutter ZW141
- Aeotec Nano Switch ZW139
- Aeotec NanoMote Quad ZWA003
- Aeotec TriSensor ZWA005
- Aeotec Water Sensor 6 ZW122
- Alfred Touchscreen Digital Deadbolt DB2
- August Smart Lock Pro ASL-O3
- Dome Door/Window Sensor DMWD1 (Added specific DPW)
- Eaton/Cooper Aspire RF Lamp Dimmer RFLDM
- Enbrighten Smart LED Bulb 39723
- Evolve Dimmer Module LDM-15
- Evolve Dual Outlet Receptacle LOM-15
- Evolve Relay Module LPM-15
- Fibaro Radiator Thermostat FGT-001
- Fibaro Single Switch 2 FGS-213
- Fibaro Wall Plug FGWPB-1x1
- GE Smart dimmer 1000 Watt ZW3006
- GE/Jasco Hinge Pin Door Sensor 32562/32563/ZW6301
- GE/Jasco In-Wall Fan Controller ZW4002
- GE/Jasco In-Wall Smart Dimmer ZW3004 (Added specific DPW)
- GE/Jasco In-Wall Smart Switch 12727/ZW4003 (Added specific DPW)
- GE/Jasco Plug-in Smart Dimmer ZW3104 (Added specific DPW)
- GE/Jasco Plug-in Smart Switch 14282/ZW4106
- GE/Jasco Plug-in Smart Switch ZW4103
- GE/Jasco Portable Smart Motion Sensor ZW6302
- GE/Jasco Smart Lighting & Appliance Control Outdoor Module ZW4201
- Gerber Prime Switch GPS-2000
- Heiman Z-Wave Carbon Monoxide Sensor HS1CA-Z GEN5
- Honeywell Outdoor Switch 39346/ZW4201
- Honeywell Plug-in Dimmer 39336/ZW3104
- Honeywell Plug-in Dimmer 39339/ZW3107
- Honeywell Plug-in Smart Switch 39337/ZW4103
- Honeywell Plug-in Smart Switch 39342/ZW4106
- Intermatic Motion Sensor CA9000
- Leviton Scene Capable In-Wall Receptacle VRR15
- MCO Home Electrical Heating Thermostat MH7
- NEO Coolcam Door/Window Sensor NAS-DS01Z
- NEO Coolcam Motion Sensor NAS-PD01Z
- NEO Coolcam On/Off Plug NAS-WR01Z (Added specific DPW)
- NEO Coolcam Water Sensor NAS-WS01Z/WS02ZU (Added specific DPW)
- NodOn Soft Remote CRC-3-6-0X (Added specific DPW)
- SWF Basic Remote Control BRZ1
- SWF Cellular Shade Radio Z-Wave CSZ1
- SWF Multi-Channel Remote Control MCZ1
- SWF Remote Controller VCZ1
- SWF Roller Shade Radio Z-Wave RSZ1
- Sensative Strips Door/Window Sensor MaZw
- Somfy Z-Wave to Digital Motor Interface (1870171)
- Zipato RGBW Bulb 2
- ZooZ Motion Sensor ZSE18
- Centralite 3-Series Micro Motion Sensor 3328-G (Zigbee)
- Centralite 3-Series Night Light Repeater 3420 (Zigbee)
- Centralite 3-Series Smart Outlet (Type F) 3200-Gde (Zigbee)
- Centralite 3-Series Smart Outlet 3200-Ggb/3200-gb (Zigbee)
- Centralite 3-Series Temp/Humidity 3310-G (Zigbee)
- Centralite 3-Series Temp/Humidity 3310-Geu (Zigbee)
- Centralite 3-Series Water Sensor 3315-G (Zigbee)
- Centralite 3-Series Water Sensor 3315-Geu (Zigbee)
- Centralite 4-Series Smart Outlet 4200-C (Zigbee)
- Centralite CentraLite Smart Outlet (Type E) 3200-Gfr (Zigbee) (Added specific DPW)
- Centralite CentraLite Smart Outlet (Type G) 3200-Sgb (Zigbee) (Added specific DPW)
- 2GIG Flood and Temperature Sensor FT6-345
- Hikvision DS-2CD1023G0-I camera (Added specific DPW)
- Hikvision DS-2CD2121 (Added specific DPW)
DPW - Device Pairing Wizard
Comments
0 comments
Please sign in to leave a comment.