UI7 - Vera Firmware Update - Version 7.0.31 + new Cloud storage service (1.7.5185/1.7.5186/1.7.5187) - September 2nd, 2020

• Video records from VistaCam PT have only 8-15 seconds (on the old implementation/storage the length of video was 19-20 seconds)

• Some of the mjpg files are not encoded in mp4 format

• Storage option is mission from the Web UI under the camera settings on VistaCam 1200 

   

Previous known issues (targeted to be included for the next release):

• Storage page on Vistacam 702  doesn't load in some scenarios in the Web UI.

• Wrong error message being displayed on the Web UI when the VistaCam 702 camera is disconnected.

• Buttons overlap current date when viewing live image on VistaCam 702. 

• Issues on VistaCam 1200 where the 'Configuring' message/bar is still displayed even if camera is already configured.

• Controller reboots and engine reloads while recording videos on multiple old cameras. 

• Not able to manually change day/night extra setting on Vistacam 700 from the Web UI

• Error message being displayed when trying to update Weather Settings without changing Temperature Format.

• Issue reported on units that are bridged, with devices on the slave units that generate alerts on the master unit , every time the engine reloads. The issues was reported for door locks.

• Not being able to control Hue devices with the Philips Hue 2 plugin.

• Icons/templates for UV Sensors and Generic Sensors have no space between “Level” and the value for “Level” is not being correctly aligned.

• Associations handled from web UI are still handled securely even when the device has been included insecurely.

• Issue with previous notifications added being still present in user_data after Reset Z-Wave Network was done.

• Plugin startup messages is not being displayed correctly on dashboard cards

• Job watch callback is not receiving job number

• Error message about snapshots, recording, live view are displayed multiple times on cameras.

• Disable “Broadcast SSID” not working from Settings"->“Net & Wi-fi” ->select “Manually configure (advanced)”;

• Lights are turning off while live streaming page is open on Firefox, when the option to turn on the light when user view the camera is be enabled.

• Preset modes Frost /Confort / Confort-1 / Confort-2 aren’t properly set on Qubino DIN Pilot Wire device.

• Issue on Vision Glass Break & Shock Detector VSN-ZS5101US where In step two no content is displayed in Device Wizard.

• Burglary alerts are received without template.

• Not being able to change setpoints in scenes for GoControl GC-TBZ48 thermostat

• Issue on Aeon LED Bulb (ZW098) when changing color back to white the color is changing to ‘blueish’ white.

• Yale Door Locks has some incorrect message being displayed when trying to add restrictions to pin codes that are not displayed in clear ("****")

• Smart switches with category 3 and subcategory 3 ( in Wall Switches) are displayed with wrong icon in cpanel/setting section.

• Issue on the Web UI with not handling times which don’t contain seconds when editing an existing scene.

• Not being able to add Foscam C2 third party camera using the add device wizard

• Aeon Smart Switch generating ghost child devices after pairing.

• Not being able to remove multi-channel association on Gerber GPS-2000 devices.

• Not being able to set weekly restrictions on Schlage BE469ZP and BE468ZP locks

• Child devices are missing for Philio PST03-1A 4 in 1 Multi-Sensor after pairing.

• Issue on Qubino ZMNHJD1 (Pilot Wire) with no mode is selected when a scene is run with action set as Confort-1/ Confort-2 if mode number set to be suported by Qubino ZMNHJD1 (Pilot Wire) device is 4

• Qubino Flush On/Off Thermostat 2 is not being configured during the secure inclusion process

• Controller is removing log files even though the process to upload them to servers has failed.

• Device category name inconsistency for RGB Bulbs between Web UI and mobile platforms.