Congratulations on choosing the VistaCam 1200 Doorbell Camera. It’s now easier to see and even talk to whoever is on your doorsteps when you’re not at home. Installing the VistaCam 1200 doorbell is a relatively straightforward process if your home already has low-voltage wiring from an existing doorbell, but if you decide to use this as a stand-alone doorbell there’s also a small power adapter in the box.
Before starting the installation make sure you are familiar with the contents of the included accessories and also consult our list of compatible mechanical and digital chimes on our website.
For convenience, you are also provided with faceplates in three colors and three angled mounting plates to accommodate installation on both flat and angled surfaces.
Important: Make sure you've updated your Vera controller to the latest available firmware (minimum version must be 7.0.31 , released on September 2nd ), for the Doorbell to be detected and paired correctly.
Table of contents:
- Compatible Mechanical and Digital Chimes
- VistaCam 1200 Doorbell Wiring
- VistaCam 1200 Doorbell App Set-Up
- VistaCam 1200 Doorbell Quick Start Guide (Downloadable)
- VistaCam 1200 Troubleshooting Guide
Need help setting up?
You can reach our Customer Care team seven days a week at 866.966.2272 between 6am and 10pm US CST/EST or at support@getvera.com.
You can also purchase our Vera Easy Start service and get one hour of personalized setup assistance through a phone call with one of our most experienced agents. Visit getvera.com to learn more.
Comments
0 comments
Article is closed for comments.