Vera3, VeraLite, & VeraLite G: 1.7.649
VeraEdge: 1.7.1320
Starting with the 7.09 release the Z-Wave firmware on the VeraLite and Vera3 controllers was upgraded to a newer version provided by Sigma, version 3.67 (300 series). Following the change it was determined that several options from the Z-Wave Settings page were no longer required for either platform and were removed from the 7.10 release from all the controllers, including VeraEdge (which is already running a newer version of Z-Wave, version 3.83 [500 series]).
The options which were removed are:
▾ Use Z-Wave version 3.20 instead of 2.78
▾ Use Vera routing instead of Z-Wave
▾ Limit neighbors to Z-Wave discovery
A more important aspect that was changed in the 7.10 release was the removal of the old Heal/Repair process which was no longer required with the latest versions of the Z-Wave firmware.
VeraEdge: 1.7.1320
Starting with the 7.09 release the Z-Wave firmware on the VeraLite and Vera3 controllers was upgraded to a newer version provided by Sigma, version 3.67 (300 series). Following the change it was determined that several options from the Z-Wave Settings page were no longer required for either platform and were removed from the 7.10 release from all the controllers, including VeraEdge (which is already running a newer version of Z-Wave, version 3.83 [500 series]).
The options which were removed are:
▾ Use Z-Wave version 3.20 instead of 2.78
▾ Use Vera routing instead of Z-Wave
▾ Limit neighbors to Z-Wave discovery
A more important aspect that was changed in the 7.10 release was the removal of the old Heal/Repair process which was no longer required with the latest versions of the Z-Wave firmware.
| Known Issues: | ||
| Some thermostats don’t support 0.5 increments. | ||
| Turn All Lights On/Off not working for some lights. | ||
| Type | Priority | Summary |
| New | Major | (Customer Request) Add support for decimal temperatures for z-wave devices |
| Chg. Req. | Minor | Password should not allow blank spaces between the words that compose it |
| Imp. | Critical | Add support for digest authentication in REQ_Image and other camera functions |
| Imp. | Major | add automatic assign return routes and neighbor node updates |
| Imp. | Major | move armed tripped into the luup engine |
| Imp. | Major | Change PK_KitDevice with device name in wizard detection |
| Bug | Blocker | (Customer Issue) We should be able to select how Vera Edge will connect to the internet |
| Bug | Blocker | (Customer issue) The door sensor from Fibaro FGK-103 doesn't work |
| Bug | Blocker | (Customer Issue) Z-wave settings changes to Master SIS:YES PRI:YES after upgrade to UI7 |
| Bug | Blocker | Vision Door Window sensor ZD2102 - gen3 remains tripped |
| Bug | Blocker | Device wizard search isn't fully functional |
| Bug | Blocker | Aeon Minimote not working anymore in 7.09 |
| Bug | Blocker | Streaming doesn't work if Secure Unit is enabled |
| Bug | Blocker | Scene status must be returned when a scene is run |
| Bug | Blocker | LuaUPnP isn't restarted when Sync_Kit or Sync_Rediscover changes |
| Bug | Blocker | Trip-Untrip-Trip not working properly on door/window sensors |
| Bug | Blocker | Door Window Sensors and Glass Break Sensors cannot be untripped anymore |
| Bug | Critical | (Customer Issue) Intermatic HA05 cannot be turned ON |
| Bug | Critical | (Customer Issue) Foscam pan&tilt not working |
| Bug | Critical | (Customer Issue) CommFailure variable not updated if powered device no longer works |
| Bug | Critical | (Customer issue) Leviton Dimmer cannot turn On/Off devices if used as trigger |
| Bug | Critical | (Customer issue) UI7 can not set set point 26^C or above to thermostat after receiving report from thermostat |
| Bug | Critical | Motion sensor not reporting |
| Bug | Critical | Record button doens't work on IE 11 (old player) |
| Bug | Critical | Unit can't be set into inclusion mode - no device can be included |
| Bug | Critical | Changing house modes through the Keyfob fails |
| Bug | Critical | Wintop isensor added with Generic IO child devices |
| Bug | Critical | Add in KitDevice and in Kitdevice_Variable the US Aeon Multisensor |
| Bug | Critical | Add all cameras that are on shop on Manual add camera list |
| Bug | Critical | Duplicate scenes |
| Bug | Critical | Wrong notification sent when adding a new pin code on door locks |
| Bug | Critical | 2014-06-12 Setpoint changed from web ui is not updated to thermostat after wake up |
| Bug | Critical | Trigger "A code was changed using the lock keypad" doesn't work properly - Yale Touschscreen Deadbolt |
| Bug | Critical | Window covering is not displayed in Edit house modes |
| Bug | Critical | videos shorter than programmed |
| Bug | Critical | Switch to wifi option is missing from the cameras |
| Bug | Critical | Setpoint is not displayed on the interface for Secure SRT321 radiator |
| Bug | Major | (Customer Issue) Phone Provider Dropdown Menu is missing |
| Bug | Major | (Customer Issue) Wintop iModuleSingle can't be turned on |
| Bug | Major | (Customer Issue) Vera reboots because of Sercomm plugin |
| Bug | Major | (Customer Issue) The Fibaro FGK 10x is not getting tripped all the time. |
| Bug | Major | (Customer Issue) Sunrise and Sunset Scenes set on Saturday and Sunday are not working on EST timezone |
| Bug | Major | all the sensors are often seen as disconnected/connected |
| Bug | Major | confirmation email not sent |
| Bug | Major | No device detection with movement detection |
| Bug | Major | Improve template for scene notification - STG |
| Bug | Major | Event type "Thermostat ambient temperature goes above X degrees" - not working |
| Bug | Major | CurrentTemperature missing for Water & Temperature Sensor |
| Bug | Major | Icon for binary sensor is Garage Door. |
| Bug | Major | Wrong info in "Unpair device" wizard - Kwikset door lock |
| Bug | Major | Edit Startup Lua - not working without adding a delay |
| Bug | Major | ArmedTripped is not automatically created/updated |
| Bug | Major | "Pincode" value for a alarm panel used in scenes is saved as "_undefined_" in user_data |
| Bug | Major | Add an info text when a backup is created or restored |
| Bug | Major | Current Setpoint is not displayed correctly in Advanced Settings - Thermostats |
| Bug | Major | Current Setpoint is not displayed correctly on device cpanel - Thermostats |
| Bug | Major | Devices having no data in DB |
| Bug | Major | CURL version used in last OpenWRT upgrade impacted the communication from the Nest Plugin |
| Bug | Major | Yale PushButton Deadbolt - not detected by the Wizard in Step 3 |
| Bug | Major | preview image not shown |
| Bug | Major | Current setpoint - not displayed correctly in Advanced Settings - Thermostats |
| Bug | Major | Inconsistency on Secure Unit section |
| Bug | Major | Aeon SmartSwitch doesn't jump in device wizard to step 3 (G150) |
| Bug | Major | Lenght of videos = 12-13 seconds |
| Bug | Major | Issues with the length of video records for VistaCam SD |
| Bug | Major | Remotec ZTS110 thermostat setpoint not set on the device |
| Bug | Major | LuaUPnP Reload after recording videos VistaCam SD |
| Bug | Major | Variable "CurrentTemperature" for thermostats should have decimals |
| Bug | Major | [DZLSwUS158] Linear WT00z - 3 Way Wall Accesory - does not have a Setup Wizard |
| Bug | Major | Setpoint displayed in Advanced Settings is not the same with the one displayed on device cpanel - Thermostats |
| Bug | Major | Encrypted files viewable using data_request?id=file |
| Bug | Major | luup.is_night does not work with UI7 |
| Bug | Major | Vision Door Window sensor ZD2102 - is not detected correctly by the Add Device Wizard |
| Bug | Major | Currency variable does not update properly |
| Bug | Major | Inoperable buttons on pop-up window after device is detected |
| Bug | Minor | Inconsistency on "Notifications settings" name |
| Bug | Minor | When unit is set "Through a wi-fi access point", the mode "Manually configure (advanced)" is displayed as enabled |
| Bug | Minor | Inconsistency "setpoint"-"set point" |
| Bug | Minor | Typo in confirmation message displayed when you want to delete an action in Advanced Editor (Scenes) |
| Bug | Minor | Wrong info in Unpair Wizard for Philio 4 in 1 multisensor (PSM02-2) |
| Bug | Minor | Wrong info in Unpair Wizard for Aeon DSC24 |
| Bug | Minor | Wrong info in Unpair Wizard for Kwikset Door Lock |
| Bug | Minor | Wrong info in Unpair Wizard for Aeon DSC25 |
| Bug | Minor | Wrong info in Unpair Wizard for Linear Garage Door Opener |
| Bug | Minor | Display an info message when no Other user is added |
| Bug | Minor | Typo in Add Device Wizard for "Nest Thermostat" |
| Bug | Minor | Superposition in "Serial Port configuration" |
| Bug | Minor | Wrong info in Unpair Wizard for Aeon Water Leak Sensor |
| Bug | Minor | Inconsistency for Show password in Wireless settings section |
| Bug | Minor | Typo in confirmation message displayed in Device Simulator |
| Bug | Minor | Temperature format (C/F) is not displayed on the temperature sensor |
| Bug | Minor | Issue in "Net & Wi-fi"->"Manually configure (advanced)" |
| Bug | Minor | Typo in section "Test Luup code (Lua)" |
| Bug | Minor | Inconsistency in House Modes order |
| Bug | Minor | Wake-up text for Z-Wave.Me Gen5 Keyfob contains word HAB |
| Bug | Minor | Wrong icon for Water Leak Sensor at "Step 3: Name Your Device" |
| Bug | Minor | Input box "Code" from "Edit Startup Lua" shouldn't be marked as mandatory |
| Bug | Minor | Add restrictions when adding a notification for thermostats - "Thermostat HEAT set point goes over"/"Thermostat COOL set point goes below" |
| Bug | Minor | Add restrictions when adding a notification for thermostats - "Ambient temperature goes above"/"Ambient temperature goes below" |
| Bug | Minor | Add restrictions when adding a notification for thermostats - "Battery level goes below" |
| Bug | Minor | Add restrictions when adding a notification for thermostats - "Energy usage goes above"/"Energy usage goes below" |
| Bug | Minor | Don't display current setpoint and disable up & down button when thermostat is in OFF mode - in Advanced Settings |
| Bug | Minor | Weekly restrictions for pin codes are always displayed in 24hrs format |
| Bug | Minor | Issue when you try to filter the alerts - "No alerts found for the selected filter" |
| Bug | Minor | Wrong info in Unpair Wizard for Ecolink Motion Sensor |
| Bug | Minor | Wrong info in Unpair Wizard for Ecolink Door/Window Sensor |
| Bug | Minor | Countdown timer - displayed twice when changing house modes (sometimes) |
| Bug | Minor | "m_iDataSize" displayed when you backup Z-Wave Network |
| Bug | Minor | Inconsistency for Vera logo |
| Bug | Minor | Inconsistency for show/hide password for 3G connection |
| Bug | Minor | The regions of Brazil are not displayed correctly |
| Bug | Minor | Inconsistency in "Develop apps"->"Luup files" |
| Bug | Minor | Issue when no USB stick is attached and option "Store logs on USB device*" is enabled |
| Bug | Minor | To display the correct status for thermostats - it is required to reload the page |
| Bug | Minor | Issue in Add Device Wizard for "Light and Appliance Module Jasco 45602" |
| Bug | Minor | Name of the room from alert "low battery level" - missing |
| Bug | Minor | Device name, room name and description missing from template - notification "Thermostat Mode Changes" (STG) |
| Bug | Minor | Issues in template for alert "energy below" - STG |
| Bug | Minor | Gateway name, device ID, device name, code, value, alert ID and gateway SN are missing from template for alert type "Energy usage goes above" - STG |
| Bug | Minor | Missing info from template "Brightness goes above" - STG |
| Bug | Minor | "Serial Port configuration" is not updated after button "Reload Luup" is pressed |
| Bug | Minor | Inconsistency in description for notifications : "Energy usage goes above" / "Energy usage goes below" |
| Bug | Minor | Section "Device is included in" - not working |
| Bug | Minor | Decimals missing in Configure My Preset Modes |
| Bug | Minor | Wrong info in Unpair Wizard for Aeon 4 in 1 Sensor |
| Bug | Minor | Wrong info in Unpair Wizard for Garage Door Opener |
| Bug | Minor | Decimals missing in Device Actions (Scenes) |
| Bug | Minor | Wrong icon for Garage Door Opener - in Step 3 |
| Bug | Trivial | (Customer Issue) lu_sdata request does not return correct values for thermostats |
| Bug | Trivial | If name of the scene contains "-" and it is disabled then "(scene disabled)" is displayed twice in tooltip |
| Bug | Trivial | Recorded videos shorter than expected |
Comments
0 comments
Please sign in to leave a comment.