Vera3, VeraLite, & VeraLite G: 1.7.730
VeraEdge: 1.7.1598
Over the last week we have received reports from a handful of users citing remote camera streaming issues, and or, (Lua engine) controller instability after installing the 1.7.719/1.7.1569 software update.
This complication only manifests under very specific circumstances, and has affected a very low number of users to date, however we are recommending everyone to update to the latest firmware version that includes a patch to address.
VeraEdge: 1.
Over the last week we have received reports from a handful of users citing remote camera streaming issues, and or, (Lua engine) controller instability after installing the 1.7.719/1.7.1569 software update.
This complication only manifests under very specific circumstances, and has affected a very low number of users to date, however we are recommending everyone to update to the latest firmware version that includes a patch to address.
Issue Type | Priority | Summary | Component/s |
New Feature | Major | (Customer Request) Add support for Color Control CC to support Zipato RGBW light bulb | LuupEngine |
Improvement | Major | CLONE - UI7 - Users & Accounts Info / Account Info *** Special Characters Not Accepted *** | Web UI |
Epic | Critical | Fibaro Window Covering Roller Shutter-GEN3 Device Integration | Management |
Epic | Major | Yale Door Lock T1L(YRD120) Touchscreen Deadbolt Device Integration | Device integration Management Process |
Epic | Minor | Danfoss Living Connect Radiator GEN3 Device Integration | Device integration Management Process |
Epic | Minor | Secure Radiator SSR303-GEN3 Device Integration | Device integration Management Process |
Epic | Trivial | Vision CO Sensor Z-Wave 6301 Wireless CO Detector-GEN3 Device Integration | Device integration Management Process |
Epic | Trivial | NuTone Garage Door Opener NGD00Z-GEN5 Device Integration | Device integration Management Process |
Epic | Trivial | Sercomm 8110/VistaCam 700 IP Camera Device Integration | Device integration Management Process |
Bug | Blocker | Cannot turn Zipato RGBW bulb on from Dashboard | Web UI |
Bug | Blocker | FirstAlert zCombo is tripped by every alarm type | LuupEngine |
Bug | Blocker | Devices are not displayed anymore | Web UI |
Bug | Blocker | (Customer Issue) Vera does not boot automatically in case of a power loss. | LuupEngine |
Bug | Blocker | (Customer issue) VERA UI7 Firmware capability to connect to a wireless router is not working | Web UI |
Bug | Blocker | Interface is blocked by spinner when trying to access alerts from Dashboard | Web UI |
Bug | Blocker | Unable to enable Secure unit | Web UI |
Bug | Blocker | Temperature color pickers are not working - Zipato Switch RGBW LED Bulb Gen5 | Web UI |
Bug | Blocker | Unable to enable USB logging on G150 | LuupEngine |
Bug | Blocker | Interface is blocked by spinner when trying to access notifications for a specific device | Web UI |
Bug | Blocker | PNP missing for Aeotec Switch RGB LED Bulb ZW098-Gen5 | Web UI |
Bug | Blocker | Tokens are not renewed after MMS is restarted | LuupEngine |
Bug | Critical | Email address not detected properly on User info page | Web UI |
Bug | Critical | Notifications are multiplied by itself (random) | Web UI |
Bug | Critical | "Autountrip" variable makes Vision D/W sensor return to untrip after 5 seconds | LuupEngine |
Bug | Critical | Spinning wheel doesn't disappear in Control tab for sensors | Web UI |
Bug | Major | Inconsistency in dimmer bar for Zipato RGBW | Web UI |
Bug | Major | Superposition for TempLeakSensor when window is resized | Web UI |
Bug | Major | Secure SSR303 needs to display only Heat and Off controls | Web UI |
Bug | Major | There is no view for error on accessing Notifications Settings page | Web UI |
Bug | Major | Icon not changing when lights are turning On | Web UI |
Bug | Major | Status message displayed under control buttons for several devices | Web UI |
Bug | Major | "No actions could be found for the following devices" displayed when a heater is selected at Step 2: Device Actions (Scenes) | Web UI |
Bug | Major | "No actions could be found for the following devices" displayed when a thermostat is selected at Step 2: Device Actions (Scenes) | Web UI |
Bug | Major | Incorrect icon for GDO when device is closed | Web UI |
Bug | Major | Error message when trying to exclude Danfoss radiator | Web UI |
Bug | Major | Error message when trying to exclude ZXT-120 | Web UI |
Bug | Major | Cannot set temperature with decimals from web UI | Web UI |
Bug | Major | Camera snapshot too large on Manually add camera Step2 | Web UI |
Bug | Major | If Vision Glass Breaker is tripped once then variable "Tripped" reports "1" twice | LuupEngine |
Bug | Major | Unable to set the target temperature using decimals - Thermostats | LuupEngine |
Bug | Major | Linear D/W Sensor WADWAZ-1 always tripped | LuupEngine |
Bug | Major | Secure SSR303 device shouldn't contain curent setpoint arrows | Web UI |
Bug | Major | Buttons Heat and OFF buttons should be hidden for Heater Secure SRT device | Web UI |
Bug | Major | Relay heater cannot be turned off from House modes | Web UI |
Bug | Major | Incorrect triggers and notifications for relay heater | Web UI |
Bug | Major | Negative values displayed for timer when changing house modes | Web UI |
Bug | Major | Token displayed in Add Device Wizard for Poly Control Doorlock | Web UI |
Bug | Major | Devices without wizard cannot be excluded from interface | Web UI |
Bug | Major | Remove variable "AutoUntrip" for Vision Glass Break Sensor | LuupEngine |
Bug | Major | Error message when trying to exclude Secure SRT321 heater | Web UI |
Bug | Minor | 2 spinning wheels displayed when changing house modes in 3G mode | Web UI |
Bug | Minor | "Vera IP changed" is displayed all the time when you make a change in Net & Wi-Fi Settings and unit has already a static IP | Web UI |
Bug | Minor | Inconsistency when hover over Time Restrictions in scene creation | Web UI |
Bug | Minor | Issue when you filter alerts by type and "Date/Time" is not "Today" | Web UI |
Bug | Minor | Incorrect text for GDO for opened/closed button | Web UI |
Bug | Minor | Unknown category for Garage door opener | Web UI |
Bug | Minor | Sort Other Users according to username or user type | Web UI |
Bug | Minor | "Energy goes below 0" shouldn't be valid trigger in Scenes | Web UI |
Bug | Trivial | On Device - Controll page, toggling an on/off switch provides no feedback until a Z-Wave reply is returner | Web UI |
Bug | Trivial | Wait <5 seconds before changing from home to mode - no feedback on change mode | Web UI |
Comments
0 comments
Please sign in to leave a comment.