Release Notes – Vera UI7 - Version 7.06
Build: 1.7.569 (VeraLite & Vera3)
Build: 1.7.1089 (VeraEdge)
Build: 1.7.569 (VeraLite & Vera3)
Build: 1.7.1089 (VeraEdge)
| New Feature |
| H.264 Support for fluid video playback |
| 1-Way Audio for Vera VistaCams |
| The camera presets are in UI7 |
| Device integration |
| Linear LB60Z-1 - Light Bulb Integration |
| WO15Z-1 - In Wall Receptacle Integration |
| Express Controls EzMultiPli Integration |
| WS15Z-1 - In Wall 15a Light Switch Integration |
| WD500Z-1 - In Wall 500 watt Dimmer integration |
| WD1000Z-1 - In Wall 1000 watt Dimmer Integration |
| Nest Thermostat support (plugin & wizard) |
| Bug |
| "Add User" button should be restricted for Advanced Users |
| "AM/PM" not displayed correctly in "Add Scene" - Nexus tablet |
| "Auto" mode for thermostats |
| "Cameras" menu shouldn't be restricted for users : "Basic User" |
| "Every X seconds" missing from Schedule Interval |
| "Generic Device" can be selected in "Step 2: Device Actions" |
| "Show password" in section "Change camera current username/password to" doesn't have any functionality |
| "Undefined" displayed in popup when store USB logs enabled |
| (Customer issue) - UI7 Advanced Variables display issues |
| (Customer issue) Cannot turn blinking led from Viscam PT |
| (Customer Issue) Change category type for Linear Garage door opener |
| (Customer issue) Devices with more than one slider |
| (Customer Issue) NaN in command for thermostats for Secure SRT321 thermostat |
| (Customer Issue) Secure SRT321 thermostat cannot be controlled from UI7 |
| (Customer Issue) The switch between the units doesn't work properly remotely |
| (Customer Issue) Device options configuration parameters constant pop-up messages |
| (Customer Issue) LuaUPnP flooded with sunrise/sunset messages |
| (FORUM REPORTED) Cannot open device simulator |
| *Quota limit reached* email received after 21 emails even though Notification limit is set to 0 |
| 314_Pb_Explicit_authentification |
| 386_Modify_room for one element of 3en1 don't involve for the others |
| 397_Pb_associate_Siren |
| 406_Pb_Wifi_Parameter display |
| 458_ paired devices display with unknown name |
| 470_impossible to play a movie with Chrome 39 and IE11 |
| 479_keypad_add_user - Bad confirmation popup when adding user |
| 490_Wizard -install_Siren_The button Quitter is present on step1-2-3 |
| 491_Wizard_install_Sirene_the menu_Reset_Usine is absent |
| 513_Error_Message when user filled Validation Code even it is correct |
| 523_Pb_ Installation wizard for supported devices |
| 524_chevron buttonon Red House card does not return the list of warnings of x devices |
| 525_Pb_install_HAB_Spinner displays, no accces to HAB. |
| 526 - Siren installation wizard - Bad icon in Step 3 |
| 528_keypad_Pb displays when user delete_Pin_Code. All codes desappear. a refresh is requisite |
| 533 - HAB install wizard - Phone number accept more than 9 numbers |
| 534_Pb_when user create a rule with sign<> with 3in1 light the name token displays |
| 535_By default _any event is ticked in rule when user has selected sensor as trigger |
| 539_Keypad-Add-badge-rename-1er-badge |
| 540_Suppress RFID = error msg in dashbord and keypad menu |
| 546_in predefined mode, when user check notify someone spinner displays indefinitely |
| A scene with duplicate name can be saved |
| Activate / Deactivate button scenes doesn't work properly |
| Add more restrictions in section "Signup Now"->'Emergency Contacts" |
| 'Add pin codes' two buttons with the same name and different functionality |
| Add restrictions in section "Z-Wave Settings"->"Repair" |
| Add restrictions in Z-Wave Settings page |
| Advaced user doesn't have access to see default wirelles password |
| Aeon dimmer added as binary light |
| After adding billing information the address field wasn't auto-filled |
| Bad alignment, wrong cursor and missing tool-tip on other users notification table |
| Basic User can edit House Modes |
| Battery removed, but not alert received by users (or sometimes some few days later) |
| Button "Restore Defaults" shouldn't be displayed for CO sensors in Create New Scene |
| Button "Rstore Defaults" shouldn't be displayed for door locks in Create New Scene |
| Button take snapshot from devices Page doesn't work |
| Buttons "Heal without stress test" and "Heal with stress test" are not displayed all the time |
| Camera Bosch IP 2000 isn't recognized using auto-detect |
| Camera SD is detected as security sensor |
| Can create a scene with a schedule once set from a date in the past |
| Cannot go back or forward in a recorded video |
| Can't change value for thermostat in Edit Modes Page |
| Change message displayed when pin already exists |
| Clock not working properly in IE10, Chrome and Safari |
| Plug your Energy Metering Smart switch into a 110 Volt Receptable |
| Unable to change state Off/Heat for Danfoss thermostat |
| cmh_Reset.all fails if LuaUPnP is stuck in deadlock |
| Count Up timer from "Firmware" page never stops |
| Create another pnp in KitDevice for AEON DSC25 |
| Current setpoint displayed on thermostat icon in step 2 (create a new scene) |
| Customers cannot login with usernames containing upper case letter. |
| Danfoss Radiator should be preset to Heat |
| Danfoss Radiator shouldn't contain states: OFF/Heat/Cool/Auto in Edit Modes |
| 'Del' button inconsistecy, Device Settings Page |
| Delay message isn't proper in edit modes page |
| Delay module popup should appear only when 'Home' mode is changed |
| Device list is updated with new device added only after menu tabs are changed |
| Device list isn't updated with new device added on unit |
| Device notifications page overlap |
| Device status overlaps battery icon in List view |
| Devices - camera play button |
| Devices buttons are not aligned on Dashboard page |
| Door locks shouldn't have 'Wakeup interval (seconds):' |
| Duplicate trigger once with the same date and time can be created |
| Error message displayed although all fields are filled in SW |
| Escape curl arguments that start with @ |
| Event selection for On OFF device doesn't work |
| Filter "Failed devices" - not working |
| Flash player detection doesn't work properly in IE10 |
| For Appliance Module in scene summary the content isn't correct for ''Whenever the Appliance Module is turned on'' event selected |
| FUT/OBS Inconsistency between the info displayed on the web UI and the info displayed by the cust care |
| FUT/OBS Problem time for an HAB in 1.7.800 |
| Garage door appears in Camera settings under 'Turn on the lights:' section |
| ghost device appear when dissociate device |
| Glass Break Sensor displayed as a motion sensor |
| Graphical inconsistencies on devices cpanel notifications |
| HAB_07.08.Rules_DisableRule_EnableDisableRule |
| Hardware issue with the Zwave 500 keyfob |
| Hash tag is not updated for "Insteon Settings" page |
| HEM should not be displayed in step 2 (select device actions) in Create New Scene |
| HEM shouldn't have "On/Off" buttons |
| Improve error message "Contact field Phone conditions not met. Field required:yes and max length:20" |
| Improve error message "Field State conditions not met. Field required: yes and max length:2" |
| Improve template for alert type "Camera sent image" |
| Improve template for alert type "Camera sent video" |
| Inconsistency - Add Device Wizard for users : Basic User |
| Inconsistency between field restriction and error popup message for 'Energy used' field |
| Inconsistency between the buttons from the dashboard and the buttons from control part for the Linear garage door should have |
| Inconsistency for "add favorite" between app and web version |
| Inconsistency for "my modes" |
| Inconsistency for "Take snapshot" icon in step 2 (select device actions) - Create New Scene |
| Inconsistency for Add keyfob instructions |
| Inconsistency for Basic User restrictions |
| Inconsistency for button "Take a snapshot" between web and app versions |
| Inconsistency for change thermostat setpoint by clicking on value |
| Inconsistency for General Status Card between web and app version |
| Inconsistency for house modes label in Scenes, Step3 |
| Inconsistency for last/first name in SW |
| Inconsistency for 'revert changes' button from Net&wifi page |
| Inconsistency for time format when adding weekly restrictions |
| Inconsistency for tooltips "activate scene" and "deactivate scene" |
| Inconsistency in Add Device Wizard for "Garage Door Opener" |
| Inconsistency in Add Device Wizard for Linear WD500Z-1 |
| Inconsistency in Help note content, Device Settings Page |
| Inconsistency in list of notifications added on a device |
| Inconsistency in notifications limits |
| Inconsistency in Unit Settings for Basic Users |
| Inconsistency on Keypad add pin code page |
| Inconsistency on View by List Page |
| Inside temperature for thermostats is not displayed on the icon on "Devices"->"View by List" |
| Invalid camera URL in Devices for cameras |
| Invalid characters for Dimmer accessory RF9542 name |
| Issue - dimmers in "Step 2: Device Actions" |
| Issue for sensors that can be armed/bypass in Device Actions (Create New Scene) |
| Issue related to commands attached to the slider control |
| Issue when 2 different messages are displayed at the same time in device cpanel |
| issue when changing modes |
| Issue with "Schedule"->"Once" |
| Issue with sensors (motion, d/w, smoke, flood) |
| Issue with the 2G : HABs 47100093 and 47100610 |
| Issues in message displayed when Vera 3 is set "through a wi-fi access point" |
| Issues in section "Enroll Now" |
| Issues in Support Portal STG when window is resized |
| Kwikset doorlock Pin codes deleted and readed appear as inactive |
| Layout for "Devices view by List" is the same with the layout for "Devices view by Type" - Nexus Tablet |
| Light sensor and temperature sensor for philio psm02-2 device has the zwave icon |
| Linear LB60Z-1 Led Bulb added as binary light |
| Live streaming isn't working on IE 11 for Camera sercomm 8110 |
| Lua should be restarted after device is deleted |
| Message "Please wait 3-5 minutes for camera firmware upgrade" still displayed after firmware upgrade was done |
| Method VerifyDeviceMac() always return false |
| Missing images from "Add Device" wizard for "Vision ZD2102" |
| Missing space bettwen Group ID and Currently values and buttons : Del / View. |
| Missing token - Security card |
| Motion sensor state should be ARMED/BYPASSED |
| Name of the wifi network |
| No alert is sent to Alarm Relay when unit is disconnected |
| No device message is missing from Scene Action Step |
| Notification Email value 'Sent' increase event thought Notification limit is reached |
| Notifications not working |
| Phone Number - State number is not changed according to State |
| Phone number validated ok but error message displayed |
| Port is not saved correctly when a camera is added manually with Other IP camera |
| Portal - Login Alignment Issues |
| Power Up State Variables aren't conform requirements |
| Preset Mode doesn't function properly (Default/Custom changes) |
| Preset Mode doesn't function properly (Device state buttons) |
| 'Recover Password' Page error message for incorect old password not proper |
| Refresh needed to update page info after email validation |
| Restriction lenght message for device name appears even thought device name has the correct length |
| Room assignment for multi sensor devices |
| Scene doesn’t support 2 scene geofence with different status but with the same geofence as reference |
| Scene Run button on a green round font |
| Scene with Location trigger don't run |
| Secure Srt 321 is detected as thermostat |
| Security card isn't updated properly |
| Sensors reporting as not being seen by the HAB whereas they can trigger alerts |
| 'Show pin codes in clear' checkbox doesn't function properly |
| sliders don't work with touch screen |
| SmartSwitch device cattegory is different than web |
| Spinning icon displayed on house modes after a mode is selected |
| Sprint 5 - Energy Module (Nothing Appears) |
| Sprint 5 - Setup Wizard (Confirm Workflow) |
| Sprint 5 - Setup Wizard (Confirm Your Information Screen) |
| stack corruption detected |
| State field validation not obvious |
| Status "Unlocked" always displayed after button "Control" is pressed - Kwikset Push Button Lever Lock |
| Streaming FLV is filling the controller memory |
| Success message shown as error |
| Support type 2 user can't validate his email address |
| Support user created with end user account type |
| Text corrections |
| The actual of battery is not displayed after "Battery level goes below" |
| The control tab doesn't show for Keypad |
| The Evolve T100R thermostat will not configure properly (shop). |
| The shortcut "View failed devices" from "Current Status" card - not working |
| The wizard for WPS VistaCam 700 displayed as "Unknown Model" |
| Themostat appears 2 times when is selected once as action in a manual scene |
| There is no edit or delete button for action in scenes Step 2 |
| Timezone can't be edited |
| Typo in "ACCOUNTS"->"DETAILS" - Support Portal STG |
| Typo in "Device Trigger" (Create new scene) |
| Typo in Add Device Wizard for "Kwikset Door Lock" |
| Typo in create end user request |
| Typo in section "Billing" from "Accounts"->"Details" - Support Portal STG |
| Unable to change settings in Z-Wave Settings->Repair |
| Unable to change temperature from device arrow buttons. Blocked by VUI-1902 |
| Unable to edit or delete a device action in "Step 2: Device Actions" |
| Unit Name is not saved in Setup Wizard - Basic User |
| 'Unlocked Door Locks' label isn't shown in My shortcuts section |
| Update name for dimmer accessory in Add devices wizard |
| Upgrade on remote never end due to bad url for script |
| User can slide from scenes step 1 to Menu |
| Value "100%" split on 3 rows for dimmers |
| Variable "KWH" not displayed for HEM |
| Vera edge Z-Wave reset doesn't change HomeID |
| Video Recorded Size isn't fullscreen |
| Weather widget not displayed |
| Web_07.03.Rules_Calendar_Chrome_using-scroll-bar-makes-disappear-popup |
| When adding Insteon PLM the port is always: "false" |
| When you want to add the second trigger button "Next Step" should be disabled |
| wifi networks not showing |
| Wireless Setup wizard for VistaCam 700 opens add device wizard for VistaCam SD |
| Wrong buttons for Siren |
| Wrong icon displayed for Danfoss Radiator in "Select a device..." (Create New Scene) |
| Wrong icon for thermostat in Create New Scene |
| Wrong icons displayed for installed apps in "Select a device..." (Create New Scene) |
| Wrong info in "Unpair your device" wizard - Yale Touchscreen Deadbolt Lock |
| Wrong message after the upgrade is started |
| Wrong message displayed when name of the pin code is already used |
| Wrong message displayed when pin code has less than 4 digits |
| Wrong order for "Interval Schedule" options |
| Wrong position for scene 'run error icon' |
| Wrong position for word "Inside" - thermostat in device actions - create new scene |
| Wrong steps in Unpair Wizard for Linear WD1000Z-1 |
| Wrong steps in Unpair Wizard for Linear WD500Z-1 |
| Wrong Timer selector for Before Sunrise/Before Sunset/After Sunrise/ After Sunset comparing to web app |
| Wrong wizard for Linear WO15Z-1 |
| You can add opposite actions for the same device in Create New Scene - Immediately |
| You can't add 2 triggers type "Schedule - Once" in the same scene |
Comments
0 comments
Please sign in to leave a comment.