|"Lamp Module" in category "Sensors" in Add Device Wizard List
|"N/A" displayed in Step 3: Name Your Device for Aeon DSB29
|"Thermostat" (Centralite 3157100) in category "Sensors" in Add Device Wizard List
|"Undefined" displayed in popup when store USB logs enabled
|"x" Lights Off message is not displayed when button "Turn All Off" is pressed
|(Customer Issue) Aeon Labs Gen5 ZW089 does not work
|(Customer Issue) Aeon Labs MiniMote no longer works on UI7
|(Customer Issue) Binary switches do not turn ON in UI7
|(Customer Issue) Door lock reconfigures when "keep a copy of my pin codes" is checked
|(Customer Issue) firmware.getvera.com doesn't upgrade Vera 3 / Lite to the latest build 1.7.481
|(Customer Issue) Foscam pan & tilt not working
|(Customer Issue) Improper message is displayed when we try to record a video
|(Customer Issue) Master devices show up as binary sensors in House Modes
|(Customer Issue) Temp Leak sensor doesn't display the current temperature.
|(Customer issue) The "greater" sign does not work to trigger events
|(Customer Issue) The motion sensor for the Aeon multi sensor generation 5 is not added.
|(Customer issue) Verbose logging is enabled by default on Vera Edge
|(Customer issue) We cannot configure the Combination switch
|(Customer issue) We cannot set weekly restrictions.
|(Customer issue) You'll be brought at the top of the page and it's very annoying.
|(FORUM REPORTED) lu_status request is blocking other requests and is causing performances issues.
|'Add Action' page message overlap
|Add additional info in Add pin code flow for Keyfob
|Add device button is missing and appearing in View By List Devices and Favorites Page
|'Add pin codes' required fields should be marked properly
|'Add pin codes' two buttons with the same name and different functionality
|Aeon 4in1 Motion is not getting tripped
|After the upgrade from 1.7.906 to 1.7.957 some of the battery operated devices are not configured anymore
|Alert type "DL_CODE_CHANGED" shouldn't be sent by email/SMS
|Alerts type "Login from IP address" are not working - misnamed parameter
|Button "Edit user" should be restricted for Advanced Users
|Camera help overlay content isn't completely show when phone is rotated
|Camera help overlay returns to first step when view is changed from portrait to landscape
|Camera help overlay, inconsistency Recorded tab section portrait view vs landscape
|Camera settings are not setup properly
|Cannot recover password when username contains "@"
|Change message displayed when pin already exists
|Change template for notification "Pin code entered"
|I have multiple Vera's on my network. (Large home...
|Modes get highlighted incorrectly
|Navigating in "My alerts". Trying to find images o...
|'Del' button inconsistency, Device Settings Page
|Device name with more the 20 characters can be saved
|Device notifications page overlap
|Device number in security cards doesn't correspond to the number of devices armed
|Device status overlaps battery icon in List view
|Devices tab is blank after visiting Settings -> Location tab [g150]
|Display a message when there are no results in "Users"->"Details" - Support Portal STG
|Display loading icon when lights are selected on Camera Settings page
|Display only one option for 'thermostat goes above/below x degrees'
|Display popup with warning when thermostat mode can't be set
|Duplicate devices list shown in View by list (Redirect from Security Cards)
|Empty popup on unassign process on portal
|Ergy double scroll bar
|Errors displayed when installing plugins "Program Logic Timer Switch" and "Program Logic Event Generator"
|Garage door opener (Linear DG00Z) has the same icon as a light sensor
|Hash tag is not updated for "Insteon Settings" page
|Heal report page has no information displayed
|Horizontal scroll bar is displayed on web browser
|Improper message displayed when there is no record from an IP camera
|Inconsistency between field restriction and error popup message for 'Energy used' field
|Inconsistency between 'Home' icon web and iOS
|Inconsistency between the buttons from the dashboard and the buttons from control part for the Linear garage door should have
|Inconsistency for Other users password restriction
|Inconsistency for password restriction
|Inconsistency for 'revert changes' button from Net & Wifi page
|Inconsistency for time format when adding weekly restrictions
|Inconsistency in "Setup Wizard"- if Unit name field is empty
|Incorrect alerts received from Philio sensor
|Incorrect status for Secure Vera on the support portal
|Information on Location Page isn't saved
|Input box for pin code doesn't have a name
|iOS app crashed when I tap on Notify checkbox (geofence)
|JSON button width parameter ignored in UI7
|Latitude and Longitude fields shouldn't accept letters
|Missing devices from Devices/Type view
|Missing space between Group ID and Currently values and buttons : Del / View.
|No feedback displayed when button "Save Changes" for "Electricity Cost" is pressed
|No records - type "User logged in"
|Not all Vera user name is visible on edit preset modes page
|Notification limit page changes permissions changes after refresh
|Notifications not working
|Outside Lock Button on Schlage - not working
|Overlay Welcome Popup content isn't visible when moving from page scroll bar
|Philio 4 in 1 Waiting for wakeup to configure device
|Pin code index/number is not present in template for "User code # was entered, but is before or after the date range set for in"
|Recessed Door Sensor Gen5 (Z-Wave+) Aeon ZW089-C not working
|Record video popup inconsistency ( Devices vs Live View)
|'Recover Password' Page error message for incorrect old password not proper
|Remove event "Ambient temperature goes above or below" from the list of events that can trigger a scene
|Remove search box from Add generic z-wave device
|Remove tooltip info from Daily Restrictions for Pin Codes
|Restriction length message for device name appears even though device name has the correct length
|'Show pin codes in clear' checkbox doesn't function properly
|Sprint 5 - Device Wizard (Camera Pairing)
|Storage field empty when no item attached
|Superposition in Current Status Card
|Take snapshot message isn't proper
|Temperature sensor (child device) - is not created anymore for Fibaro Smoke Sensor (FGSS-001)
|Template for "Pin code was removed" is incomplete
|The footnote "Required" should be right justified to input fields
|The size assigned to the tab having the flag top navigation tab is smaller in UI7 than the standard window size in UI5
|Thermostat Remotec ZTS110 status message isn't properly shown in device container
|Token displayed in Keypad Control page
|Typo in "Current Users" list
|Typo in "Welcome screen"
|Unable to navigate to failed devices from Dashboard card
|Unit time is not displayed anymore
|'Unlocked Door Locks' label isn't shown in My shortcuts section
|Update info about room name restriction
|Update/Add account phone info - MMS 500 server error
|Upgrade while on remote connection should redirect to new build
|Values added in fields 'Variable' aren't saved, Devices Page.
|View by list settings arrow are not aligned
|Wasted space in Devices view
|When editing a trigger from a scene, modes selection is lost
|Wi-Fi networks not showing up correctly
|Wrong message displayed when name of the pin code is already used
|Wrong message displayed when pin code has less than 4 digits