Connect Your First Device and Automate It

Vera provides you with a Device Wizard to make adding devices much easier. The Device Wizard provides step-by-step onscreen instructions to guide you through the process.
 

Connect your first device:

• From Vera's Dashboard, go to Devices -> Add device

 

• And select the device you wish to pair with Vera.

 

Make your first automation

To make sure the lights turn on automatically when people come home, you can create a Scene for sunset. We will guide you through the process to make a sunset Scene. You can create additional scenes using the same instructions with slight variations. 
 

How to create your own "Automatic Lights At Sunset" Scene

 

1. Select "Scenes" in the Vera Dashboard app
2. Select "Add Scene"
3. Choose "Schedule" as the type of trigger
4. Choose "Daily" as the interval
5. Choose "Before Sunset" as the trigger time
6. Click "Validate"
7. Click "Next Step"
8. Click "Select Devices"
9. Scroll down to select the devices that you want to trigger. Check the boxes on the right to select which light switches and dimmers you want to control the lights
10. Set the dimmers to turn to full and the switches to turn on (this is what you are setting them to do at sunset)
11. Click "Validate"
12. Click "Next Step"
13. Under "Finish the Scene," select which Modes you want the Scene to run in -- home, away, vacation, and night (The default is all modes)
14. Under "Name Your Scene," fill in a name for the Scene, such as "Lights on at Sunset"
15. Click "Finish"

You're done! The Scene has been created. There's no need to test it; just check tomorrow at sunset to make sure the lights turn on.